Product information
Deta Screwless - 8556CH - 20a Double Pole Switch With Neon
Deta Part Code: 8556CH
From the Deta Flat Plate Screwless Range
Description
Deta Flat Plate screwless front plate, square edges with polished Chrome finish and black inserts
Installation
All metal decorative face plates must be earthed in accordance with the latest edition of the IEE wiring regulations and should be installed by a qualified electrician.
These decorative wiring accessories should not be installed onto a newly plastered or freshly decorated walls until thoroughly dry (refer to the manufacturers data for determining drying times) as some wall finishes may contain alkali's and solvents.
To prevent tarnishing gaskets should always be fitted between the plate and the wall. It is strongly recommended that the products are only installed when the building works are completed, as exposure to brick, cement and plaster dust and the like may adversely affect the finish and operation of the products. Alternatively as protection a plastic bag should be retained on the product during the installation process, also note that masking tape should not be applied to the product.
Cleaning Advice
These decorative wiring accessories have been manufactured with the finest materials and some are treated with a fine coat of lacquer to give a hard durable finish.
The only cleaning treatment required is by wiping over the plate with a soft dry lint free cloth, however for more stubborn marks, a very lightly moistened cloth with a mild detergent such as washing up liquid can be used. Note: This liquid must be diluted before use.
Under no circumstances should any abrasive or solvent polishes, cleaning fluids, paint removers or similar treatments of this kind be applied to the product.
The ultra slimline front plate ensures a clean, flawless look that will complement any modern room setting. With the option of both metal and polycarbonate finishes available you will receive great value for money, together with exceptional performance.
Features
With the professional in mind, all products can be fully installed and tested before the addition of the screwless frontplates, which simply but securely clip onto the mounting system.
The removable front plates also provide a practical solution when decorating.
All plate switches are X-rated and can be used for switching inductive or fluorescent loads without de-rating
Clear terminal markings
Captive and backed out terminal screws
Only one size 4mm screwdriver needed
Terminals have large lead-ins
Ultra slim 4mm plate
Complies with BS EN 60669-1
Dimensions: 86 x 86mm
Unused old stock
Please Note:
Orders placed before 1PM on any business day will be posted same day.
Photographs.
We mainly use our own stock photos so the picture on the listing may not be the actual listed item, but will be a match.
The picture/s on the listing is only a guide! The seller does not accept responsibility for a buyers perceived differences in colour from the actual item received.
Please be aware that when trying to match finishes on old or obsolete items, not all manufacturers are the same. Some manufacturers will change their finish/design when they update a product and the new product's finish/design could be slightly or very different.
On rare occasions we may, during cleaning and final inspection, that an item is found damaged after the sale is made. If this was the last in stock and we have an alternative item we will inform the buyer and send the alternative one out.
It is recommended that this item and all my other electrical items are installed by a qualified electrician or competent person.
The seller takes no responsibility for injury/damage to persons or property due to incorrect selection or installation of equipment.
Please note Went Vale is not currently registered for VAT, so we are unable to provide VAT invoices. You may obtain all the necessary paperwork from your 'My eBay' purchase history section 'View order details'.
Returns:- If you wish to return your item please notify us by email or letter of your intention to cancel within 14 calendar days of receipt of your order before returning any goods. Verbal instruction is not accepted
Returns MUST be:
• Unused and in the original condition. It must also be in the original box/packaging along with screws, all parts and instructions supplied. We cannot accept any other items as a substitute.
• Care must be taken with the packaging of returned goods. Please do not apply tape to the boxes the goods were supplied in.
• If damage is found on returned goods, we reserve the right to refuse the return.
We can only accept the original goods in their original condition. We may make a deduction from the reimbursement as a result of unnecessary handling on your part. We reserve the right not to accept the return.
We are not responsible for any loss of goods or damage during transit whilst being returned to us.
Deta Part Code: 8556CH
From the Deta Flat Plate Screwless Range
Description
Deta Flat Plate screwless front plate, square edges with polished Chrome finish and black inserts
Installation
All metal decorative face plates must be earthed in accordance with the latest edition of the IEE wiring regulations and should be installed by a qualified electrician.
These decorative wiring accessories should not be installed onto a newly plastered or freshly decorated walls until thoroughly dry (refer to the manufacturers data for determining drying times) as some wall finishes may contain alkali's and solvents.
To prevent tarnishing gaskets should always be fitted between the plate and the wall. It is strongly recommended that the products are only installed when the building works are completed, as exposure to brick, cement and plaster dust and the like may adversely affect the finish and operation of the products. Alternatively as protection a plastic bag should be retained on the product during the installation process, also note that masking tape should not be applied to the product.
Cleaning Advice
These decorative wiring accessories have been manufactured with the finest materials and some are treated with a fine coat of lacquer to give a hard durable finish.
The only cleaning treatment required is by wiping over the plate with a soft dry lint free cloth, however for more stubborn marks, a very lightly moistened cloth with a mild detergent such as washing up liquid can be used. Note: This liquid must be diluted before use.
Under no circumstances should any abrasive or solvent polishes, cleaning fluids, paint removers or similar treatments of this kind be applied to the product.
The ultra slimline front plate ensures a clean, flawless look that will complement any modern room setting. With the option of both metal and polycarbonate finishes available you will receive great value for money, together with exceptional performance.
Features
With the professional in mind, all products can be fully installed and tested before the addition of the screwless frontplates, which simply but securely clip onto the mounting system.
The removable front plates also provide a practical solution when decorating.
All plate switches are X-rated and can be used for switching inductive or fluorescent loads without de-rating
Clear terminal markings
Captive and backed out terminal screws
Only one size 4mm screwdriver needed
Terminals have large lead-ins
Ultra slim 4mm plate
Complies with BS EN 60669-1
Dimensions: 86 x 86mm
Unused old stock
Please Note:
Orders placed before 1PM on any business day will be posted same day.
Photographs.
We mainly use our own stock photos so the picture on the listing may not be the actual listed item, but will be a match.
The picture/s on the listing is only a guide! The seller does not accept responsibility for a buyers perceived differences in colour from the actual item received.
Please be aware that when trying to match finishes on old or obsolete items, not all manufacturers are the same. Some manufacturers will change their finish/design when they update a product and the new product's finish/design could be slightly or very different.
On rare occasions we may, during cleaning and final inspection, that an item is found damaged after the sale is made. If this was the last in stock and we have an alternative item we will inform the buyer and send the alternative one out.
It is recommended that this item and all my other electrical items are installed by a qualified electrician or competent person.
The seller takes no responsibility for injury/damage to persons or property due to incorrect selection or installation of equipment.
Please note Went Vale is not currently registered for VAT, so we are unable to provide VAT invoices. You may obtain all the necessary paperwork from your 'My eBay' purchase history section 'View order details'.
Returns:- If you wish to return your item please notify us by email or letter of your intention to cancel within 14 calendar days of receipt of your order before returning any goods. Verbal instruction is not accepted
Returns MUST be:
• Unused and in the original condition. It must also be in the original box/packaging along with screws, all parts and instructions supplied. We cannot accept any other items as a substitute.
• Care must be taken with the packaging of returned goods. Please do not apply tape to the boxes the goods were supplied in.
• If damage is found on returned goods, we reserve the right to refuse the return.
We can only accept the original goods in their original condition. We may make a deduction from the reimbursement as a result of unnecessary handling on your part. We reserve the right not to accept the return.
We are not responsible for any loss of goods or damage during transit whilst being returned to us.
Technical specifications
| Model: | Deta Screwless |
| Type: | Double Pole Switch |
| MPN: | 8556CH |
| Current Rating: | 20A |
| Finish: | Polished Chrome |
| Brand: | Deta Screwless |
| Condition: | New |