MK K172 MCO Albany Plus - Twin LJU6C Data Module Front Plate
Cat No: K172 MCO
Albany Plus Range
Albany Plus Manufactured from the finest materials and coated with a special heat-cured powder lacquer finish. The Albany Plus range is highly scratch resistant maintaining its subtle good looks for many years and adding that touch of class to the finest decor. Available in satin brass (SAB) which is made from high quality solid brass with a durable, tarnish resistant finish and matt chrome (MCO).
Matt Chrome finish
- Twin front plate for 25 x 38mm LJU6C Modules
All metal decorative face plates must be earthed in accordance with the latest edition of the IEE wiring regulations and should be installed by a qualified electrician.
These decorative wiring accessories should not be installed onto a newly plastered or freshly decorated walls until thoroughly dry (refer to the manufacturers data for determining drying times)as some wall finishes may contain alkali's and solvents.
To prevent tarnishing gaskets should always be fitted between the plate and the wall. It is strongly recommended that the products are only installed when the building works are completed, as exposure to brick, cement & plaster dust and the like may adversely affect the finish and operation of the products. Alternatively as protection a plastic bag should be retained on the product during the installation process, also note that masking tape should not be applied to the product.
These decorative wiring accessories have been manufactured with the finest materials and some are treated with a fine coat of lacquer to give a hard durable finish.
The only cleaning treatment required is by wiping over the plate with a soft dry lint free cloth, however for more stubborn marks, a very lightly moistened cloth with a mild detergent such as washing up liquid can be used. Note: This liquid must be diluted before use.
Under no circumstances should any abrasive or solvent polishes, cleaning fluids, paint removers or similar treatments of this kind be applied to the product.
- Conforms to: BS 5733: 2010
- DIMENSIONS: 86 x 86mm
- FIXING CENTRES: 60.3mm
|Product Code:||K172 MCO|
|Brand:||MK Albany Plus|