MK Albany Plus - K931 MCO - 13a Switch Fused Connection Unit + Front Flex Outlet
£17.28
Out of stock
Product information
< For Sale:
MK Albany Plus K931 MCO - 13a Switched Fused Connection Unit with Front Flex Outlet
MK Electric Part Code: K931 MCO
From the Albany Plus Range
Albany Plus Is manufactured from the finest materials and coated with a special heat-cured powder lacquer finish. The Albany Plus range is highly scratch resistant maintaining its subtle good looks for many years and adding that touch of class to the finest décor. The older Albany range was available in satin brass (SAB) which is made from high quality solid brass with a durable, tarnish resistant finish, Matt Chrome (MCO) and Brushed Stainless Steel (BSS). The more recent Albany Plus range is made in the same finest materials but now also available in brushed Chrome (BRC), Satin Gold (SAG) and Polished Chrome (PCR) all are still durable and tarnish resistant
Matt Chrome finish white inserts
Installation
All metal decorative face plates must be earthed in accordance with the latest edition of the IEE wiring regulations and should be installed by a qualified electrician.
These decorative wiring accessories should not be installed onto a newly plastered or freshly decorated walls until thoroughly dry (refer to the manufacturers data for determining drying times) as some wall finishes may contain alkali's and solvents.
To prevent tarnishing gaskets should always be fitted between the plate and the wall. It is strongly recommended that the products are only installed when the building works are completed, as exposure to brick, cement and plaster dust and the like may adversely affect the finish and operation of the products. Alternatively as protection a plastic bag should be retained on the product during the installation process, also note that masking tape should not be applied to the product.
Cleaning Advice
These decorative wiring accessories have been manufactured with the finest materials and some are treated with a fine coat of lacquer to give a hard durable finish.
The only cleaning treatment required is by wiping over the plate with a soft dry lint free cloth, however for more stubborn marks, a very lightly moistened cloth with a mild detergent such as washing up liquid can be used. Note: This liquid must be diluted before use.
Under no circumstances should any abrasive or solvent polishes, cleaning fluids, paint removers or similar treatments of this kind be applied to the product.
The flex outlet is in the front face of the connection unit
All units are fitted with a 13 amp fuse-link to BS.1362, these can be down rated to suit the needs of the installation.
In-line terminals with backed out captive terminal screws and clear marking make connecting up easy
For safe isolation purposes the fuse carrier can be locked in the open position by removing the fuse and using a K2000 fuse carrier padlock (not supplied).
Dimensions: 86 x 86mm
Fixing Centers: 60.3mm
Unused old stock
Payment Details.
You can pay by the methods indicated on the eBay site, as well as credit or debit cards payments over the phone.
For deliveries outside the UK.
International postage will normally be shipped via a Royal Mail tracked shipping method depending on the destination country.
Heavy, valuable or large parcels will be shipped with thelarger courier services but these tend to be costly, so you must ask for a quotation before purchase, and let us know how quickly you need the goods as this greatly affects the price.
Postage Charges
Please Note: The postage quoted is for both the cost of the postal service used and the cost of packing materials used, please take this into consideration when leaving DSR ratings.
Orders placed before 3 PM on any business day will be posted on the same day
Inclusive postage is offered on this listing by combining the item price and the postage and packing costs. If this option is chosen it will be sent out via our basic postage method advertised on the listing.
We reserve the right to upgrade the postal service from the advertised should the need arise.
If you require your purchase quicker please choose the Royal Mail Special Delivery guaranteed next day delivery option, but please note there is an extra charge for this option. Also, note there are Saturday restrictions with this service when ordering on Fridays.
Photographs
We use mainly stock photos so the picture on the listing may differ to the actual listed item, but will be a match for the listed item.
Listed Items
After the sale is made, on rare occasions during cleaning and final inspection we may find that an item is damaged or faulty. If this was the last in stock and we have an alternative item we will inform the buyer and send the alternative one out.
If you have any questions please ask.
Thank you for viewing this listing.
Please take a moment to review our other items.
Please add us to your favourite seller's list and subscribe to our email product updates.
Please note: Went Vale is not registered for VAT, so we areunable to provide VAT invoices. You may obtain all the necessary paperwork from your 'My eBay purchase history' and select View order details.
It is recommended that this item and all my other electrical items are installed by a qualified electrician. Went Vale Electrical Ltd takes no responsibility for injury/damage to persons or property due to incorrect selection or installation of electrical equipment.
Many thanks.
MK Albany Plus K931 MCO - 13a Switched Fused Connection Unit with Front Flex Outlet
MK Electric Part Code: K931 MCO
From the Albany Plus Range
Albany Plus Is manufactured from the finest materials and coated with a special heat-cured powder lacquer finish. The Albany Plus range is highly scratch resistant maintaining its subtle good looks for many years and adding that touch of class to the finest décor. The older Albany range was available in satin brass (SAB) which is made from high quality solid brass with a durable, tarnish resistant finish, Matt Chrome (MCO) and Brushed Stainless Steel (BSS). The more recent Albany Plus range is made in the same finest materials but now also available in brushed Chrome (BRC), Satin Gold (SAG) and Polished Chrome (PCR) all are still durable and tarnish resistant
Matt Chrome finish white inserts
Installation
All metal decorative face plates must be earthed in accordance with the latest edition of the IEE wiring regulations and should be installed by a qualified electrician.
These decorative wiring accessories should not be installed onto a newly plastered or freshly decorated walls until thoroughly dry (refer to the manufacturers data for determining drying times) as some wall finishes may contain alkali's and solvents.
To prevent tarnishing gaskets should always be fitted between the plate and the wall. It is strongly recommended that the products are only installed when the building works are completed, as exposure to brick, cement and plaster dust and the like may adversely affect the finish and operation of the products. Alternatively as protection a plastic bag should be retained on the product during the installation process, also note that masking tape should not be applied to the product.
Cleaning Advice
These decorative wiring accessories have been manufactured with the finest materials and some are treated with a fine coat of lacquer to give a hard durable finish.
The only cleaning treatment required is by wiping over the plate with a soft dry lint free cloth, however for more stubborn marks, a very lightly moistened cloth with a mild detergent such as washing up liquid can be used. Note: This liquid must be diluted before use.
Under no circumstances should any abrasive or solvent polishes, cleaning fluids, paint removers or similar treatments of this kind be applied to the product.
The flex outlet is in the front face of the connection unit
All units are fitted with a 13 amp fuse-link to BS.1362, these can be down rated to suit the needs of the installation.
In-line terminals with backed out captive terminal screws and clear marking make connecting up easy
For safe isolation purposes the fuse carrier can be locked in the open position by removing the fuse and using a K2000 fuse carrier padlock (not supplied).
Dimensions: 86 x 86mm
Fixing Centers: 60.3mm
Unused old stock
Payment Details.
You can pay by the methods indicated on the eBay site, as well as credit or debit cards payments over the phone.
For deliveries outside the UK.
International postage will normally be shipped via a Royal Mail tracked shipping method depending on the destination country.
Heavy, valuable or large parcels will be shipped with thelarger courier services but these tend to be costly, so you must ask for a quotation before purchase, and let us know how quickly you need the goods as this greatly affects the price.
Postage Charges
Please Note: The postage quoted is for both the cost of the postal service used and the cost of packing materials used, please take this into consideration when leaving DSR ratings.
Orders placed before 3 PM on any business day will be posted on the same day
Inclusive postage is offered on this listing by combining the item price and the postage and packing costs. If this option is chosen it will be sent out via our basic postage method advertised on the listing.
We reserve the right to upgrade the postal service from the advertised should the need arise.
If you require your purchase quicker please choose the Royal Mail Special Delivery guaranteed next day delivery option, but please note there is an extra charge for this option. Also, note there are Saturday restrictions with this service when ordering on Fridays.
Photographs
We use mainly stock photos so the picture on the listing may differ to the actual listed item, but will be a match for the listed item.
Listed Items
After the sale is made, on rare occasions during cleaning and final inspection we may find that an item is damaged or faulty. If this was the last in stock and we have an alternative item we will inform the buyer and send the alternative one out.
If you have any questions please ask.
Thank you for viewing this listing.
Please take a moment to review our other items.
Please add us to your favourite seller's list and subscribe to our email product updates.
Please note: Went Vale is not registered for VAT, so we areunable to provide VAT invoices. You may obtain all the necessary paperwork from your 'My eBay purchase history' and select View order details.
It is recommended that this item and all my other electrical items are installed by a qualified electrician. Went Vale Electrical Ltd takes no responsibility for injury/damage to persons or property due to incorrect selection or installation of electrical equipment.
Many thanks.
Technical specifications
| Model: | Albany Plus |
| Type: | Switched Fused Connection Unit |
| MPN: | K931 MCO |
| Current Rating: | 13A |
| Material: | Chromium Plated |
| Finish: | Matt Chrome |
| Standards: | BS 1364 |
| Voltage: | 250V |
| Brand: | MK Electric |
| Condition: | New |
| Product Code: | K931 MCO |
| Weight: | 0.25kg |