Product information
Newlec Flat Plate NLFP13SC - 13a Polished Chrome Switched Fused Connection Unit
Newlec Part Code: NLFP13SC
From the Newlec flat plate range
The flat plate range provides a ultra slim flat plate design with a high quality metal plate finish. The profile of the range includes a raised edge of just 1.5 mm.
Comprehensive range to complete any installation requirement.
These 13a fused connection units were manufactured for the Newey and Eyre electrical wholesale groups Newlec range
GET Part Code: GU5210WPC
These are also now being made under the Schneider brand name, Part Code: GU5210WPC
Polished Chrome Finish with White inserts
Installation
All metal decorative face plates must be earthed in accordance with the latest edition of the IEE wiring regulations and should be installed by a qualified electrician.
These decorative wiring accessories should not be installed onto a newly plastered or freshly decorated walls until thoroughly dry (refer to the manufacturers data for determining drying times) as some wall finishes may contain alkali's and solvents.
To prevent tarnishing gaskets should always be fitted between the plate and the wall. It is strongly recommended that the products are only installed when the building works are completed, as exposure to brick, cement and plaster dust and the like may adversely affect the finish and operation of the products. Alternatively as protection a plastic bag should be retained on the product during the installation process, also note that masking tape should not be applied to the product.
Cleaning Advice
These decorative wiring accessories have been manufactured with the finest materials and some are treated with a fine coat of lacquer to give a hard durable finish.
The only cleaning treatment required is by wiping over the plate with a soft dry lint free cloth, however for more stubborn marks, a very lightly moistened cloth with a mild detergent such as washing up liquid can be used. Note: This liquid must be diluted before use.
Under no circumstances should any abrasive or solvent polishes, cleaning fluids, paint removers or similar treatments of this kind be applied to the product.
Switched Fused Connection Unit (Spur)
All units are fitted with a 13 amp fuse to BS 1362
Any size of similar fuse from 1a up to 13a can be fitted in these FCU's to suit the installation.
For safe isolation the fuse carrier can be locked in the open position by removing the fuse and using a suitable fuse carrier padlock
Dimensions: 87 x 87 x 1.5mm
Conforms to BS 1363
Unused old stock
Please Note:
Orders placed before 1PM on any business day will be posted same day.
Photographs.
We mainly use our own stock photos so the picture on the listing may not be the actual listed item, but will be a match.
The picture/s on the listing is only a guide! The seller does not accept responsibility for a buyers perceived differences in colour from the actual item received.
Please be aware that when trying to match finishes on old or obsolete items, not all manufacturers are the same. Some manufacturers will change their finish/design when they update a product and the new product's finish/design could be slightly or very different.
On rare occasions we may, during cleaning and final inspection, that an item is found damaged after the sale is made. If this was the last in stock and we have an alternative item we will inform the buyer and send the alternative one out.
It is recommended that this item and all my other electrical items are installed by a qualified electrician or competent person.
The seller takes no responsibility for injury/damage to persons or property due to incorrect selection or installation of equipment.
Please note Went Vale is not currently registered for VAT, so we are unable to provide VAT invoices. You may obtain all the necessary paperwork from your 'My eBay' purchase history section 'View order details'.
Returns:- If you wish to return your item please notify us by email or letter of your intention to cancel within 14 calendar days of receipt of your order before returning any goods. Verbal instruction is not accepted
Returns MUST be:
• Unused and in the original condition. It must also be in the original box/packaging along with screws, all parts and instructions supplied. We cannot accept any other items as a substitute.
• Care must be taken with the packaging of returned goods. Please do not apply tape to the boxes the goods were supplied in.
• If damage is found on returned goods, we reserve the right to refuse the return.
We can only accept the original goods in their original condition. We may make a deduction from the reimbursement as a result of unnecessary handling on your part. We reserve the right not to accept the return.
We are not responsible for any loss of goods or damage during transit whilst being returned to us.
Newlec Part Code: NLFP13SC
From the Newlec flat plate range
The flat plate range provides a ultra slim flat plate design with a high quality metal plate finish. The profile of the range includes a raised edge of just 1.5 mm.
Comprehensive range to complete any installation requirement.
These 13a fused connection units were manufactured for the Newey and Eyre electrical wholesale groups Newlec range
GET Part Code: GU5210WPC
These are also now being made under the Schneider brand name, Part Code: GU5210WPC
Polished Chrome Finish with White inserts
Installation
All metal decorative face plates must be earthed in accordance with the latest edition of the IEE wiring regulations and should be installed by a qualified electrician.
These decorative wiring accessories should not be installed onto a newly plastered or freshly decorated walls until thoroughly dry (refer to the manufacturers data for determining drying times) as some wall finishes may contain alkali's and solvents.
To prevent tarnishing gaskets should always be fitted between the plate and the wall. It is strongly recommended that the products are only installed when the building works are completed, as exposure to brick, cement and plaster dust and the like may adversely affect the finish and operation of the products. Alternatively as protection a plastic bag should be retained on the product during the installation process, also note that masking tape should not be applied to the product.
Cleaning Advice
These decorative wiring accessories have been manufactured with the finest materials and some are treated with a fine coat of lacquer to give a hard durable finish.
The only cleaning treatment required is by wiping over the plate with a soft dry lint free cloth, however for more stubborn marks, a very lightly moistened cloth with a mild detergent such as washing up liquid can be used. Note: This liquid must be diluted before use.
Under no circumstances should any abrasive or solvent polishes, cleaning fluids, paint removers or similar treatments of this kind be applied to the product.
Switched Fused Connection Unit (Spur)
All units are fitted with a 13 amp fuse to BS 1362
Any size of similar fuse from 1a up to 13a can be fitted in these FCU's to suit the installation.
For safe isolation the fuse carrier can be locked in the open position by removing the fuse and using a suitable fuse carrier padlock
Dimensions: 87 x 87 x 1.5mm
Conforms to BS 1363
Unused old stock
Please Note:
Orders placed before 1PM on any business day will be posted same day.
Photographs.
We mainly use our own stock photos so the picture on the listing may not be the actual listed item, but will be a match.
The picture/s on the listing is only a guide! The seller does not accept responsibility for a buyers perceived differences in colour from the actual item received.
Please be aware that when trying to match finishes on old or obsolete items, not all manufacturers are the same. Some manufacturers will change their finish/design when they update a product and the new product's finish/design could be slightly or very different.
On rare occasions we may, during cleaning and final inspection, that an item is found damaged after the sale is made. If this was the last in stock and we have an alternative item we will inform the buyer and send the alternative one out.
It is recommended that this item and all my other electrical items are installed by a qualified electrician or competent person.
The seller takes no responsibility for injury/damage to persons or property due to incorrect selection or installation of equipment.
Please note Went Vale is not currently registered for VAT, so we are unable to provide VAT invoices. You may obtain all the necessary paperwork from your 'My eBay' purchase history section 'View order details'.
Returns:- If you wish to return your item please notify us by email or letter of your intention to cancel within 14 calendar days of receipt of your order before returning any goods. Verbal instruction is not accepted
Returns MUST be:
• Unused and in the original condition. It must also be in the original box/packaging along with screws, all parts and instructions supplied. We cannot accept any other items as a substitute.
• Care must be taken with the packaging of returned goods. Please do not apply tape to the boxes the goods were supplied in.
• If damage is found on returned goods, we reserve the right to refuse the return.
We can only accept the original goods in their original condition. We may make a deduction from the reimbursement as a result of unnecessary handling on your part. We reserve the right not to accept the return.
We are not responsible for any loss of goods or damage during transit whilst being returned to us.
Technical specifications
| Model: | Ultimate Flat Plate |
| Type: | Switched Fused Spur |
| MPN: | NLFP13SC |
| Current Rating: | 13A |
| Material: | Polished Chrome |
| Standards: | BS 1363 |
| Voltage: | 250V |
| Brand: | Newlec Flat Plate |
| Condition: | New |